This is the 1/10 scale electric powered, radio controlled, Associated RC10 B4.1 Factory Team off-road buggy kit.
FEATURES: Chassis: Molded composite bathtub style Drive: Two wheel with CVA drive shafts with pin retainer clips with steel center-drilled front axles Transmission: 2.6:1 laydown type, high-torque capacity Ball Bearings: Full set, 14 rubber sealed Shocks: Fatory Team V-2 oil-filled hard anodized threaded with b screw caps, 30 weight silicone shock oil, Factory Team blue aluminum shock bushings and pivot balls Dog Bones: MIP CVDs Differentials: Ball type with lightweight outdrives Spur Gear: Plastic, 81 tooth, 48 pitch Front Tires: Pro-Line M3 4 rib inner diameter: 2.2" (55.88mm), 1" (26mm) wide with foam inserts Rear Tires: Pro-line M3 Holeshot high traction, outer diameter 3.15(80mm), inner diameter 2.2" (55.88mm) with foam inserts Wheels: Yellow dish front; diameter 2.2" (55.88mm), width 0.87" (22.31mm), rear; diameter 2.2" (55.88mm), width 1.42" (36.08mm) Body: Pro-Line Vortex with wing Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassisamber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes the angle of the front tires as viewed from the top Suspension: Optimized for use with LiPo batteries, mounts for 4°,3.5°, 3°, and 2.5° rear toe Turnbuckles: Factory Team blue anodized titanium turnbuckles Front axles: Steel center drilled Steering: Angled-bellcrank design to minimize bump steer and maintain constant steering angles throughout the range of suspension travel
Forward-swept front end design provides maximum front end ground clearance Servo saver: Built-in with aluminum servo saver bolt and heavy duty spring Battery Strap: Carbon fiber with blue aluminum thumb screws INCLUDES: Associated RC10 B4.1 Factory Team off-road buggy kit, clear Pro-Line
Vortex body with wing, decals, tires, wheels, shock oil and instruction manual
REQUIRES: Radio: Two-channel with high-speed servo Radio Batteries: (8) AA size Pinion Gear: Number of teeth to be determined by motor Motor: 540 size for buggy applications
Battery: 6-cell NiMH with standard connector OR 2S LiPo battery
Battery Charger: To match selected battery
Building and track equipment
SPECS: Vehicle;
Length: 14.8" (377mm)
Width: 9.8" (250mm)
Weight: 3.4lbs (1530g) running weight will vary depending on parts
installed
Wheelbase: 10.7" (273mm)
Internal Gear Ratio: 2.6:1
Body:
Length: 11.3" (287mm)
Width: 5.5" (140mm)
Height: 2.9" (73mm)
COMMENTS: The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
affordable upgrade for this vehicle.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 3/16x3/8" Transmission 1 DTXC1423
2 10x16mm Transmission 1 ASCC9832
2 3/16x3/8" Rear Hubs 1 DTXC1423
2 .187x0.50x.196 Rear Hubs 1 ASCC7935
4 3/16x3/8" Front Hubs 1 DTXC1423
jxs 07/07/10
ir/jxs
BOX DIMENSIONS: 9.70" W. X 5.25" H. X 16.38" L.
BOX WEIGHT: 4.10 LBS.
ACCESSORIES
This is the Associated RC10B4.1 Factory Team Off-Road Buggy Kit.
FEATURES: Ball diff w/lightweight outdrives, Pro-Line M3 tires, Pro-Line Vortex
body, carbon fiber battery strap, blue titanium turnbuckles
REQUIRES: 2-ch radio, 8 AA battteries for TX, 6-cell NiMH or 2S LiPo battery
ESC, motor, pinion gear, charger, building & track equipment