This is the radio controlled, electric powered, 1/10 scale SC10 4x4 Short Course Racing Kit from Associated. **Additional Technical Info Will Be Added When It Becomes Available.**FEATURES: Chassis: Composite modular construction with low CG and Low Polar Moment Design Drive: Hybrid belt/gear drive, four wheel 5mm heavy duty belt system with external tension adjustment, CVAs with captured drive pins and heavy duty 6mm alloy axles Slipper Clutch: Decoupled design allows front and rear wheels to slip independently for greater traction and stability under bum conditions Differentials: Sealed, fluid filled, 32 pitch planetary gears Shocks: Oil-filled aluminum body 13mm big bore with low friction X-ring seals Body: Clear, short course design Receiver Box: Sealed, water resistant Steering: Ball bearing with adjustable steering stops Wheels: 12mm hex drive KMC replica Tires:Caster: Adjustable, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicleINCLUDES: SC10 4x4 Short Course Racing Kit with Tires, Wheels, Clear Body, Decals and Instruction Manual REQUIRES: Radio: 2-channel with high-torque steering servo Motor: 540 or 550 size, brushless recommended Pinion Gear: ESC: Compatible with selected motor Battery: 6-cell NiMH or 2-cell LiPo Battery Charger: To match selected battery Building and track equipmentSPECS: Vehicle- Length: 21.6" (550mm) Width: 11.5" (293mm) Weight: 6.1lbs (2775g) weight will vary slightly depending on electronics used Wheelbase: 12.9" (327mm) Internal Gear Ratio: 2.57:1 Body-Length: Width:Height:COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set BOX DIMENSIONS: 13.25" W. X 7.50" H. X 23.75" L. BOX WEIGHT: 7.79 LBS. ACCESSORIES This is an electric powered SC10 4x4 Short Course Racing Kit from Associated. FEATURES: 5mm heavy duty belt drive system, big bore aluminum shocks, decoupled center slipper clutch, clear body, water resistant RX box, REQUIRES: 2-ch radio w/high-torque steering servo, ESC, motor, pinion gear, charger, paint, building and track equip.