This is the electric powered, radio controlled, 1/10 scale, ready to run SC10 Short Course Race Truck with the Ready Lift Body Trim from Associated. FEATURES: Chassis: Molded composite low CG design with side nerf bars, hinged battery hold down strap fits NiMH and LiPo battery packs Drive: Rear wheel with steel rear dogbone drive shafts Motor: Associated Reedy Radon 17 turn Radio: Associated XP2 2-channel pistol grip with metal gear steering servo, transmitter does not have charge jack ESC: Associated XP SC200 forward/reverse with LiPo low voltage cut- off and reverse lockout Shocks: Oil-filled with blue aluminum bodies Body: 0.040" (1mm) thick painted and trimmed with Ready Lift trim Differential: Sealed, planetary gear Spur Gear: 87 tooth Slipper Clutch: Dual sided, externally adjustable Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black in color Tires: Multi terrain scale with reinforced sidewalls, 4.25" (108mm) diameter, 1.7" (43mm) wide Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Bumpers: Front and rear with functional rear rubber mud flaps Ball Bearings: 14 rubber sealed Suspension: Fully adjustable with steel turnbuckles Steering: Angled bellcrank "coplanar" steering with integral servo saver INCLUDES: SC10 Short Course Race Truck Kit from Associated with tires, wheels, painted body, motor, radio and instruction manual REQUIRES: Battery: 6-7 cell NiMH stick pack or 2-cell LiPo pack Battery Charger: Depending on selected battery type Transmitter Batteries: Eight AA-size Building and track equipment SPECS: Vehicle- Length: 21.6" (550mm) Width: 11.5" (293mm) Track: 9.6" (245mm) Weight: 4.6lbs (2080g) Wheelbase: 12.9" (327mm) Internal Gear Ratio: 2.6:1 Body- Length 21.6" (550mm) Width 11.5" (293mm) at front fenders, widest point 8.8" (224mm) at center section, narrowest point Height: 6" (153mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 6x10mm Transmission 1 DTXC1561 2 3/16 x 3/8" Transmission 1 DTXC1423 2 3/16 x 3/8" Idler Gear 1 DTXC1423 4 3/16 x 3/8" Rear Hubs 2 DTXC1423 4 3/16 x 3/8" Front Hubs 2 DTXC1423 The Associated SC10 is also available in kit form with unpainted body, ASCC7027. jxs 06/30/09 ir/jxs BOX DIMENSIONS: 13.75" W. X 9.50" H. X 28.13" L. BOX WEIGHT: 10.30 LBS. ACCESSORIES This is the Associated SC10 Short Course Race Truck w/Ready Lift Body Trim. FEATURES: Rear wheel drive, 17 turn motor, 2-ch radio w/metal gear steering servo, ESC w/reverse, painted & trimmed body, steel turnbuckles, oil-filled aluminum body shocks, angled bellcrank coplanar steering, composite chassis REQUIRES: 6-7 cell NiMH battery, peak charger, 8 AA batteries, track equip.