This is the 1/8 scale radio controlled, glow powered RC8.2 Factory Team Buggy Kit from Team Associated. **Additional Technical Info Will Be Added When It Becomes Available.**FEATURES: Chassis: Factory Team 7075 hard anodized aluminum --" (--mm) thick with one-piece top plate and molded composite front and rear brace Drive: Four wheel shaft drive with CVA boots on center and rear drive joints, Factory Team 7075 aluminum axles and center drives Differentials:Shocks: Factory Team 16mm Big Bore oil-filled, hard anodized bodies and 4mm titanium nitride coated shafts, steel alloy standoffs Shock Towers: Factory Team 7075 aluminum, low center of gravity design with optimized geometry Clutch: Aluminum -- shoe Wheels: Factory Team 83mm dish wheels, white in color Body: JConcepts Punisher body with Illuzion wing, low CG wing mounts Suspension: Newly designed arms with centerline shock mounts and optimized anti-roll bar suspension, Factory Team 7075 blue aluminum lower suspension mounts Steering: Factory Team 7075 blue aluminum knuckles and steering posts Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES: REQUIRES: Radio: 2-Channel with 2 Servos Radio Batteries: (8) AA size Receiver Battery: 4.8-7.4V flat or hump NiMH or 1600-2100 LiPo pack Engine: .21 rear-exhaust Fuel: 2-cycle glow fuel with 10%-15% nitromethane Glow Starter: 1.2 volt Starter Box Tires: 1/8 scale buggy Paint: Lexan specific spray or brush-on Misc. Items: Fuel bottle, building and track equipment SPECS: Vehicle- Length: 18.6" (473mm) Width: 12" (305mm) Weight: 6.98 lbs (3167g) Wheelbase: 12.7 - 12.8" (323 - 326mm) Internal Gear Ratio: 4.30:1 Body- Length: Width: Height: