E-FLITE Carbon-Z Yak 54 PNP #EFL10075 

Features Exceptionally strong and lightweight Carbon-Z airframe High-output 25-size brushless power system installed E-flite 60A Pro brushless ESC installed Digital high-speed metal gear servos installed High-performance prop optimized for precision and 3D flying Low friction carbon rod hinges Replaceable wings, stab, landing gear and control surfaces Quickly disassembles for transport or storage in this box Requires a full range aircraft transmitter, receiver, battery and charger (sold separately) Overview The Carbon-Z™ Yak 54 is a quantum leap in unlimited aircraft design that uses patent pending Carbon-Z construction. The brainchild of world aerobatic champion, Quique Somenzini, it comes out of the box equipped with the phenomenal brushless Q-Power system and digital high-speed servos. The combination of these high-performance components with the light weight and superb rigidity of the Carbon-Z airframe result in a 3D airplane with a 2:1 thrust-to-weight ratio that knows no limits. Best of all, you can have this Plug-N-Play® version airborne in just a few minutes. All you need is a full range aircraft transmitter and receiver, a 4S 14.8V 2800mAh Li-Po battery, and a 4S Li-Po charger. To get the most from the Carbon-Z Yak 54, a programmable aircraft transmitter with dual rates and exponential function is recommended. Tech Notes You will need... - A full range aircraft transmitter (with programming capabilities highly recommended) - Compatible full range receiver - 4S 14.8V LiPo Battery (2800mAh+) and compatible charger Specifications Wingspan: 48.0 in (1220mm) Overall Length: 48.5 in (1230mm) Wing Area: 525 sq in (34.0 sq dm) Flying Weight: 3.75-3.80 lbs (1.70-1.73kg) Motor Size: 25-size 1,000Kv Brushless Outrunner (included) Radio: 6+ Channel Transmitter and Receiver Trim Scheme Colors: Red Pantone 185C, Blue Pantone 286C CG (center of gravity): At wing tip, 6 inches (153mm) forward from the aileron trailing edge Wing Loading: 16.2 oz/sq foot (50.14 grams/sq dm) Prop Size: 12 x 5.25 (305 x 133mm) (included) Spinner Size: 1.57 in (40mm) Speed Control : 60-Amp Pro Switch-Mode BEC Brushless (included) Recommended Battery: 2,800mAh 4S 14.8V LiPo Flaps: No Retracts: No Control Throw (Ailerons): Low: 30mm, High: 65-70mm up/down at aileron root Control Throw (Elevator): Low: 15mm, High: 48-50mm up/down at counter balance leading edge Control Throw (Rudder): Low: 45mm, High: 65mm right/left at counter balance leading edge Approx. Flying Duration: 5 minutes Minimum Age Recommendation: 14 years Experience Level: Intermediate Recommended Environment: Outdoor Assembly Time: Less than 1 Hour Is Assembly Required: Yes