25% Pitts M-12S 50cc Performance Series ARF 

This is the radio controlled, gasoline powered, almost ready to fly Great Planes Performance Series 25% Pitts M-12s 3D Biplane. For Intermediate to Advanced Modelers. IMAA- and IMAC-legal FEATURES: Construction: Balsa and plywood Wings: Two-piece balsa and plywood with fiberglass struts, wooden belly pan, painted cabanes and composite tubes Covering: Top Flite MonoKote Radio Compartment: Plywood reinforced, accesible under canopy Cowl: Painted fiberglass Canopy: Clear, with gauge detail and painted pilot bust Wheel Pants: Painted fiberglass Landing Gear: Two-piece prebent aluminum, gray in color Wheels: Two foam 3.5" (89mm) diameter Tailwheel: Foam 1.5" (38mm) Rudder Control: Single servo, pull pull system Aileron Control: Four servos Elevator Control: Dual servo Engine Mount: Plywood Fuel Tank: Approximately 30oz (850cc) Hardware: Great Planes Heavy Duty Building Time: Ready to fly in approximately 30 hours Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods, landing gear, wheels, wheel pants, cowl, fuel tank, wood servo trays, canopy, pilot bust, decal sheet, hardware package, photo-illustrated instructions REQUIRES: Engine: 3 cu in (50cc) gasoline Radio: 7 channel minimum, 9-12 channel preferred, radio must be able to reverse each elevator servo independently, otherwise a Dual Servo Reverser (FUTM4150) is required Servos: Eight, seven with at least 150 oz-in of torque, throttle servo can be standard torque Receiver Battery: 4.8V flat NiCd, at least 1500mAh Ignition Battery: 4.8V flat NiCd, 500mAh Propeller: To match selected engine 24" (610mm) Servo Extensions: Two 12" (305mm) Servo Extensions: Five 6" (152mm) Dual Servo Extensions: Two Heavy Duty Switch Harness and Charge Jack Building and field equipment SPECS: Wingspan: 68.5" (1740mm) Wing Area: 1545 sq in (99.7sq dm) Weight: 19-20 lb (8620-9070 g) Wing Loading: 28-30 oz/sq ft (85-92 g/sq dm) Length: 80.5" (2045mm) Airfoil: Fully symmetrical Center of Gravity (CG): 6" (152mm) back from the leading edge of the center section of the top wing Control Throws: Low Rate High Rate 3D Rate Ailerons: 3/4" (19mm) 12° 1" (25mm) 16° 2" (51mm) 33° Elevator: 1" (25mm) 10° 1-1/4" (32mm) 12° 2-7/8" (73mm) 29° Rudder: 2" (51mm) 10° 3" (76mm) 14° 6" (152mm) 30° COMMENTS: Following are the colors of MonoKote used to cover this model and order numbers for six foot rolls; White TOPQ0204 Metallic Charcoal TOPQ0407 Orange TOPQ0202 Metallic Teal TOPQ0409