Havoc #3081 3S/Ballistic 13.5T Brushless System TRX 

This is the Sensor-based Havoc 3S Electronic Speed Control and Ballistic Brushless 13.5 Turn Motor from Novak. FEATURES: Ballistic Brushless 13.5 Turn Motor (NOVC3613); Completely rebuildable allowing upgrades or replacement of various parts Easy to adjust timing assembly Meets ROAR and IFMAR specifications Oversized front bearing 1/2 x 3/16" (12.7 x 4.8mm) for increased load handling and bearing life 12.3mm nickel-plated sintered neodymium rotor for maximum performance in high-temperature conditions 0.125" (3.2mm) pinion shaft accepts all existing pinion gears Sensor-based for excellent torque and low-speed driveability Compatible with the Novak GTB, Slyder and Havoc 3S electronic speed controls Color-coded hand wound stator identifies number of motor winds Heavy duty solder tabs Havoc 3S ESC (NOVM1733); Functions on either two or three cell LiPo batteries in addition to 4-9 NiMH cells Auto-detect brushed motor and battery type modes Compatible with all brushless motors having built-in thermal protection following ROAR guidelines Fully programmable, user-friendly interface with nine adjustable parameters: Minimum Brake (10 settings from 0-27%), Drag Brake (10 settings from 0-27%) Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-5%) Throttle Curve (Linear and Expo), Brake Frequency* (7 settings from 1-8 kHz), Reverse*, Motor Rotation* and LiPo Cut-Off * Available only in brushless mode Smart Braking II enables users to shift from forward to reverse Sensor-based for excellent braking and low-speed driveability 120 day limited warranty through manufacturer on both components INCLUDES: Ballistic Spec Brushless 13.5 Turn Motor with Sensor Wire, Havoc 3S ESC with Heat Sink, Cooling Fan, Power Trans Cap Module, Double-Sided Tape and Instructions REQUIRES: Installing in vehicle SPECS: Motor; Watts: 195 Color-Coded Stator: Orange kV: 3,300 RPM/volt (unloaded) Maximum RPM: 50,000 Sensor Harness Length: 9" (230mm) Motor Size: 2.07 x 1.41" (52.6 x 35.8mm) (540 size) Motor Weight: 6.6oz (187g) Shaft Diameter: 0.125" (3.2mm) ESC; Input Voltage: 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell) Size: 1.18 x 1.54" (30 x 39.1mm) Weight (without wires): 1.50oz (42.6g) Motor Limit (brushless): 8.5-turn Novak 540-size sensored motor Motor Limit (brushed): 27-turn for 540-size motor/12-turn for 550- size motor On-Resistance (brushless): 0.0012 ohms @ 25°C trans. temp BEC: 6.0 volts DC / 1.5 amps Rated Current: 120 Amps @ 25°C trans. temp Braking Current: 120 Amps @ 25°C trans. temp Status LEDs: 4 Voltage Cut-Off: 6.25V (when LiPo cut-off circuitry is enabled) Power Wires: 14G super-flex copper-strand silicone wire